Adams, John D. (John Duncan), 1879- · Chicago : Popular Mechanics Co · leaf 93
HOW TO MAKE A CANDLESTICK A CANDLESTICK of very simple construction and design can be made as follows : Secure a piece of brass or copper of No. 23 gauge, of a size suf- ficient to make the pieces detailed in Fig. 49. A rivet- ing hammer and a pair of pliers will be needed, also a pair of tin… … Fig. 48— Candle Holder Complete Cut out a piece of metal for the base to a size of 5% by 5% in. Trim the sharp corners off slightly. Draw a pencil line all around the margin and % in. away from the edge. With the pliers, shape the sides as shown in the illustration. Next lay out the holding cup…
Metal-work · Etching
Internet Archive · Getty Research Institute · Public domain (published before 1931). Free to use for anything.
