Glass blowing and working : for amateurs, experimentalists, and technicians (1898)
Bolas, Thomas · London : Dawbarn & Ward ; New York : Truslove & Comba · leaf 105
101 SEALING TTTE END. most ordinary kind of closing, and instructions are given for making. It generally happens that the end has to be rounded, and the first thing is to eliminate the little knob of glass or bleb which is in the centre of the seal, but, if the last draw off is made with a small… … thick part, as indicated by fig. 66, A, the bleb may be very unobtrusive at the outset. To remove the bleb the bottom is well and uniformly heated in the blowpipe flame, after which the open end of the tube is gently blown into, so as to slightly expand the bottom — more, indeed, than its final…
Glass blowing and working
Internet Archive · Getty Research Institute · Public domain (published before 1931). Free to use for anything.