Compton, Alfred G. (Alfred George), 1835-1913 · New York : J. Wiley & Sons · leaf 27
13 BENDING, TUBNING AN EYE. LESSON III. BENDIISTG. TURNIlSrG EYE. HAvma drawn and pointed the rod, form an eye on it, as in Fig. 3. The eye, being 1'' in diameter, will be nearly in circumference. Fig. 3. Heat about 3 of the end of the rod to a bright red heat. Lay it over the edge of the anvil,… … Fig. 4. from you as well as downward, so as to give a kind of pushing blow, till you have a good square bend. Do not hit with the edge of the hammer, nor hard {enough to bruise the iron.
Metal-work
Internet Archive · Getty Research Institute · Public domain (published before 1931). Free to use for anything.
